|
|
Culvert Sizing Using HY-8 Version 7.0 - Part 2: Inlets and Inlet Control
Architect Training Course
|
|
This 2-hour online course discusses the influence of inlet type and inlet control for culverts, using the Federal Highway Administration (FHWA) program HY-8 to demonstrate impacts. This program is available free from FHWA and is a quick and simple tool to use. Engineers are often requested to determine the appropriate size of a culvert that crosses under a roadway. While large highway projects that involve many culverts should be left to experienced hydraulic engineers, the sizing of a single culvert is not likely to require substantial experience.
This course is intended for engineers that do not have much experience in sizing culverts but have some knowledge of the HY-8 program and have a desire to improve their analytical abilities in the use of the program. Previous use of HY-8 or completion of the basic course is required.
The course will include information on type of inlets commonly used and their impact on culvert capacity.
At the conclusion of the course, you will be able to: - Navigate the FHWA HY-8 software program.
- Determine the appropriate selection of inlet types in the program.
- Analyze the impacts of different inlet types.
Course Level: Advanced Courses offered in association with RedVector and get all the FREE bonus materials below EXCLUSIVELY through ArchitectContinuingEducationOnline.com.
|
|
Sale Price: $399.00 $99.90 |
| Get Every Architect Course on this site for a year - just $399 |
|
|
|
|
For a limited time, you can now get ALL the Architect continuing education training courses on ArchitectContinuingEducationOnline.com for one low price. Whether you need ADA, Electrical, Mechanical, HVAC, Green Design, State-specific, Interiors, Codes or any other Architect courses, you can take it all for a full year.
|
|
|